Architectural Acoustics Prolinx

Architectural Acoustics, a division of Peavey, introduces Prolinx, a fully programmable DSP audio processing, routing and control system for installers. Prolinx supports I/O matrix configurations from 12x12 to 96x36.
Author:
Publish date:

Architectural Acoustics, a division of Peavey, introduces Prolinx, a fully programmable DSP audio processing, routing and control system for installers. Prolinx supports I/O matrix configurations from 12x12 to 96x36.

The Prolinx DX can operate as a self-contained system at 12x12 I/O, but users can increase the total number of I/Os to 96x36 by connecting additional EX and/or DX units. Built on 32-bit parallel SHARC processors, the Prolinx DX has a total of 1,320 MIPS allocated to input and output processing and an additional 400 MIPS of processing reserved for signal generation, frequency analysis and general communications.

Prolinx is fully configurable from the front panel using the high-resolution LCD and controls. The front panel LED signal indicators also function as momentary programmable controls. USB, Ethernet and RS-485 jacks provide easy configuration, monitor, control and upgrade.

Features include room combining, true auto-mixing, wired or wireless networking, graphic EQ at each output and 12 mic/line inputs with 48-volt phantom power. The 2RU chassis includes a quarter-VGA LCD front panel display with programmable I/O indicator switches.

The Prolinx EX is an expander unit adding another 12x12 matrix with mic/line inputs. Each EX unit adds 660 MIPS of processing power. Both the EX and DX models use the Linx System backbone for processing and I/O expansion.

For additional information, visit aa.peavey.com.