Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now


EAW Performs in Playhouse

The Bainbridge (Wash.) Performing Arts Playhouse, a purpose-built live entertainment venue, recently received a completely new sound reinforcement system designed and installed by Flamingo Audio and featuring EAW NT Series loudspeakers.

Located in downtown Bainbridge and originally opened in 1993, the Playhouse, with 254 seats, annually hosts a busy schedule of live theatrical, musical, orchestral and other productions.

Brad Walker, president of Flamingo Audio, which is based in nearby Poulsbo, Wash., worked closely with Mark Sell, technical director at The Playhouse, to formulate the space’s new system. Goals included consistent coverage at every seat in the house and dramatically improved vocal clarity and better overall full-range capability for reinforcing music.

“The previous system is what would commonly be termed as ‘beamy,’” says Sell. “It was difficult to get a balanced sound where everyone was pleased, and we had to apply a lot of equalization to attain any sort of consistency.”

Two EAW model NT29 12-inch-loaded loudspeakers are flown left and right from the front lighting truss above the stage, positioned to provide coverage to the entire audience area. “These loudspeakers are really flat,” Walker says. “I call this a ‘typical’ EAW loudspeaker design, meaning that the NT Series offers good directivity at high frequencies but maintains consistent beamwidth through the crossover point.”

The amplifiers onboard the NT29 loudspeakers offer a highpass filter switch for crossover to a subwoofer or to minimize proximity effect in voice reinforcement. A fixed lowpass filter, along with separate gain and polarity switches, allows further optimization of the crossover.

Positioned at the far ends of the lighting truss, the main loudspeakers are flown with standard hardware, with a pullback point to set the appropriate downward tilt. Walker adds that the profile of the boxes is so compact (22.6×15 inches) that they’re virtually invisible to the audience.

To bolster low-end support, a Mackie SWA1501 single 15-inch loaded active powered subwoofer is positioned at about the midway point of stage-left. In addition, dual EAW Commercial DR61 compact loudspeakers are flown from the truss, angled back toward the stage to provide downfill coverage to the performers.

All loudspeakers receive audio signal from the other key component in the new system, a Mackie TT24 digital mixing console, with its 24 inputs easily accommodating the venue’s 12 existing UHF wireless microphone systems with plenty of input channels to spare. The TT24 also provides enough processing capability to eliminate the need for additional outboard units.

“A board like the TT24 includes so many useful features for a situation like ours, such as snapshots, mute groups, onboard effects and additional aux sends,” Sell explains. “It’s also very user-friendly while retaining a lot of flexibility.”

Following installation, Walker performed some rudimentary tuning of the syste, using EAW Smaart for analysis. “Plug-and-play was definitely the motto of this process,” Walker concludes. “It’s amazing how much we can now offer in terms of both improved functionality and sound quality, and with far less hassle and complexity than ever before.”

For more information on the Bainbridge Performing Arts Playhouse, visit