Crown Audio's DCi Network 4-channel DCi4|1250N (top) and 2-channel DCi2|1250N
Harman’s Crown Audio in Elkhart, Ind., is now shipping the four highest-powered models in its DriveCore Install (DCi) Series power amplifiers. Available in both DCi Analog and DCi Network Ethernet-linkable configurations, the two-rackspace, 4-channel and 2-channel amplifiers deliver 1,250 watts per channel into 2, 4 or 8 ohms and 70 Vrms and 100 Vrms (all channels driven; 2,500 watts in bridged mode). They are designed for applications such as stadiums, arenas, amusement parks, clubs and casinos where the highest amounts of power are required.
The models include the DCi Analog 4-channel DCi4|1250 and 2-channel DCi2|1250, and the DCi Network 4-channel DCi4|1250N and 2-channel DCi2|1250N. Both share the same specs, with the DCi Network amplifiers adding Ethernet connectivity that enables networked configuration via RJ-45 cable and BLU link digital audio transport.
The amplifiers’ compact size, high efficiency and sound quality is made possible by Harman’s proprietary DriveCore amplifier IC chip. The DriveCore chip combines the amplifier driver stage into the power output stage along with additional audio-signal functions, yet is about the size of a postage stamp. DriveCore and the DCi Series’ leading-edge Class D amplifier topologies dramatically reduce size and power consumption requirements and yield much more energy-efficient operation.
Crown DCi Series amplifiers can be operated into 8-, 4- or 2-ohm loads and offer direct drive “constant voltage” capabilities for 70Vrms and 100Vrms amplification without the need for a step-up transformer, yielding higher audio quality in distributed audio applications. The amplifiers incorporate an exclusive Global Power Supply that is designed to deliver maximum power in any country and their universal AC input accepts voltages from 100 to 240 VAC, 50/60Hz (+/- 15%).
The DCI Network amplifiers offer networked monitoring and control via Harman HiQnet Audio Architect system software. The network capable DCi Series amps offer digital audio connectivity using the company’s proprietary BLU link as well as analog inputs. The DCi Series is Crown’s most green amplifier line ever, with a selectable powersave auto-standby mode where the amplifier will power after 30 minutes of no input signal and consume less than 1 watt.
In addition to the amplifiers’ balanced 3-pin input connectors and 2-pin terminal strip output connectors, a rear panel Aux port enables the amplifiers to be integrated into control systems for remote on/off and amplifier fault monitoring.
Crown DCi Series amplifiers are built for the most demanding conditions of continuous professional use and carry a three-year, no-fault fully transferrable warranty.