The new V7 Preset Library from L-Acoustics US will soon be available online at www.l-acoustics.com. When used with approved BSS or XTA processors, the new DSP settings update V-DOSC with the latest improvements in sonic performance, as well as optimize the loudspeaker system’s power resources.
Other features include eight total inputs (six balanced mic/line, two unbalanced stereo); LED level/clip status indicator on each channel; selectable 48-volt phantom power on mic inputs; two selectable stereo line inputs (mono or stereo switchable); three assignable electronically balanced outputs (left, right, aux); master level controls for each output bus; three five-segment LED meter arrays; 4-band EQ (low, low-mid, high-mid, high); integral channel muting system with priority; audio and mute bus linking; left, right, aux and mute bus links for stacking multiple units; rear-panel master/slave linking mode switch; remote master left/right level control port; rear-panel 20dB pad switch on each microphone input; front-panel continuously variable preamp gain control; rear-panel bus assign switched for each microphone channel; rear-panel global 100Hz low-cut filter switch for all microphone inputs; mute bus with rear-panel channel 1 threshold control; select switch for routing microphone mix bus post-remote control; and all audio I/O on removable Euro-type connectors.
Specifically, the benefits of the V7 Preset Library include smoother mid/high response based on detailed spatial averaging, plus revised low-section processing, including optimized low-end shelving EQ, resulting in a 2 dB increase in overall efficiency and output.
V7 also allows for greater flexibility, including many combinations of dedicated L-Acoustics subwoofers in a wide variety of applications, from speech and classical music to rap and techno. In an ongoing effort to provide end-users with complete packaged system solutions, the company has just released a new generation of panels, cabling and adapters suitable for small- to large-format FOH applications. These new accessories allow for convenient signal distribution and amplifier rack reconfiguration for ARCS, dV-DOSC and XT loudspeaker enclosures. Compatibility with current V-DOSC and dV-DOSC signal distribution, cabling and connector standards is maintained, allowing users to easily integrate ARCS or XT enclosures for complementary fill or delay system applications.
For more sound reinforcement products, visit mixonline.com/live_sound_products/index.htm.