Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×

DANLEY LOUDSPEAKERS AND SUBS LEAD THE CHARGE AT CALVARY BAPTIST CHURCH

SALT LAKE CITY, UTAH – JULY 2012: Founded in the late 1890s, Calvary Baptist Church has a long and proud history in Salt Lake City, Utah. Its high-energy gospel services have electrified parishioners since its inception, and, like other mid-sized churches, it has more or less kept pace with the technological advances that have defined the past century. However, the sanctuary’s 1990s-era sound reinforcement system lacked the power and clarity needed to maximize the impact of Calvary’s wonderful gospel musicians and vocalists, and the lack of a video system dated the experience. All that has changed since Audio Video Electronics (AVE) of Maple Grove, Minnesota installed articulate, yet powerful Danley Sound Labs loudspeakers and subwoofers and a thorough video system.

Not long ago, AVE performed an installation at Shiloh Missionary Baptist Church in St. Paul, Minnesota, and the needs and circumstances of Calvary

Baptist Church were remarkably similar to

those of Shiloh. “Of course, sound system design should be determined by the worship style of the church and the acoustical properties of the room,” explained Kevin Crow, veteran sound designer and vice president of AVE. “At both Shiloh and Calvary, the worship style was high-energy. We needed to keep energy off the walls and, where possible, use acoustical treatments to absorb energy. Danley’s synergy-horn, full-range boxes deliver remarkable pattern control all the way down to 150Hz, and Danley’s tapped-horn subwoofers are ideal for powerful low-frequency output. Few loudspeakers could function like a Danley in rooms similar to Shiloh or Calvary.”

Joe Lorence lead design engineer for AVE and Stefan Svard, president of AVE came up with a plan to cover Calvary’s sanctuary with two tight-packed Danley SH-60 full-range loudspeakers. An SM-96 was used for a front downfill and another SM-96 for a back delay. Another SM-96 was used for the sound booth and balanced with the main system. Joe Lorence generated an EASE Sound Coverage Plot to verify the design. Two Danley TH-118 subwoofers round out the low end, powered by ElectroVoice CPS-series amplifiers. The two TH-118s are capable of literally shaking the entire building. An ElectroVoice NetMax system provides DSP and system control. A Danley SH-100 covers a dedicated overflow space into the gym adjacent to the sanctuary. Two additional (and uniquely affordable) Danley SM-96 molded-horn loudspeakers provide a separate full-gym system with re-used JBL subs from the old sanctuary system.

AVE’s natural instinct and recommendation was to include a new sound booth on the main floor of the sanctuary, from which an operator could easily generate mixes on the new Allen & Heath iLive console system that would sound pleasing to the entire church. However, the officials at Calvary Baptist insisted that the sound booth remain in an elevated position at the back of the room. Recognizing that the perceived quality of the new system would depend on the ability of the operator to generate those awesome mixes, AVE placed a delayed Danley SM-96 directly in front of the sound booth. “Then we carefully implemented a gain structure that would give the operator the same volume and frequency response in the booth that the parishioners were getting on the floor,” he said. “We even used two Tannoy Di6s and room mics to feed an “ambience” into the sound both so it sounds like you’re on the main floor in the sound cubby. This is something we have never done before,” Crow said and “we were surprised it worked so well.”

AVE also improved the sound at Calvary Baptist with acoustical treatments. Absorptive panels at the back wall solve a slap and flutter problem, and the addition of batt insulation above the drop tile ceiling reduces the room’s reverb time considerably. Harder ceiling tiles above the stage generate a pleasant early reflection. Perhaps most importantly, however, AVE instructed the church to build corner bass traps. “Those traps suck all that low frequency energy in, but the people in the seats sure feel it first!” Crow said. “In addition Danley’s synergy-horn design is so revolutionary, we don’t just use it in situations like Calvary, where we can provide acoustical treatments. The synergy-horn pattern response is so tight that we can keep energy off reflective surfaces in more traditional spaces.” Of course, combining that pattern control with acoustical treatments is the best of both worlds.

The church’s new video system is impressive. Three Vaddio ClearVIEW HD-19 robotic cameras with Vaddio ProductionVIEW HD control provide input. A Kramer VP-729 switcher/scaler then feeds a pair of Vivitek D6010 6000Lumen projectors, as well as a new Internet web streaming system. New lights complete Calvary Baptist’s new look. In addition, the church’s musicians have made the switch from wedges to an Aviom personal monitor system, complete with Clark Synthesis tactile bass shakers.

“Apart from the usual challenge of learning to navigate new equipment, the folks at Calvary Baptist are loving their new A/V system,” said Crow. Nor are they being shy about using it to full capacity. “If they want they can run that system at 105dB, C-weighted,” he continued. “And the Danley loudspeakers sound amazing at high SPL.”

ABOUT DANLEY SOUND LABS Danley Sound Labs is the exclusive home of Tom Danley, one of the most innovative loudspeaker designers in the industry today and recognized worldwide as a pioneer for “outside the box” thinking in professional audio technology. www.danleysoundlabs.com

For more information on Audio Video Electronics, visit: www.audiovideoelectronics.com

Close