NEW YORK, NEW YORK, NOVEMBER 13, 2013 — General Cable is pleased to debut a breakthrough in hybrid fiber cabling for mobile and permanent install SMPTE applications with the new Gepco® Brand HDC720HD 7.2 mm Hybrid Fiber Cable at the 2013 Content and Communications World (CCW) conference and exhibition (Booth #1311) in New York City November 13-14, 2013. Radically different from typical industry products, the HDC720HD is the first piece of a patent-pending hybrid fiber system that solves the most common durability issues associated with SMPTE camera cables in a smaller, lightweight design.
The revolutionary construction of the HDC720HD starts with eliminating the typical heavy steel strength member which often contributes to premature cable failure due to different expansion and contraction rates of the individual elements within the SMPTE hybrid fiber cable during temperature extremes. In the HDC720HD, the steel is replaced by a Kevlar® strength member that has the same pull strength of steel, but is lighter and more flexible. Unlike steel, the Kevlar strength member expands and contracts at the same rate as the glass members. Using Kevlar in place of steel also means the cable has virtually no memory making the cable easier to pay off, lay flat and wind back up on the drum.
For further durability, the HDC720HD utilizes bend-insensitive fiber elements with very low attenuation and a bend radius of 0.2 mm—versus 2.0 mm for traditional single-mode fiber—in a breakout style with additional Kevlar protection around the individual fibers.
In the HDC720HD, the typical outer braid is replaced with two 18 AWG drain wires that allow the cable to be more flexible, lighter and smaller in diameter. The master jacket of HDC720HD is polyurethane, which is tougher than PVC for rugged outdoor use, and its glossy finish reduces the pickup of dirt and debris from outside applications, making it easier to keep clean.
With a 31-percent smaller diameter and a 40 percent weight savings over 9.2 mm cables, HDC720HD allows 300 meters of cable on a drum in the same space and with less weight than 200 meters of 9.2 mm cable occupies.
“The new HDC720HD cable fixes so many of the common issues with SMPTE hybrid fiber camera cables with the added bonus of being smaller and lightweight,” said Joe Zajac, Sales and Applications Engineer for Gepco® Brand Products. “This makes the HDC720HD extremely ideal for use in portable applications and with high-definition Steadicams.”
General Cable (NYSE:BGC), a Fortune 500 Company, is a global leader in the development, design, manufacture, marketing and distribution of aluminum, copper, and fiber optic wire and cable products for the energy, construction, industrial, and communications markets. In August 2009, Gepco International was acquired by General Cable. For more information about General Cable products, please contact your local sales representative or visit our Web site at www.gepco.com or www.generalcable.com.
Gepco® has been an industry-leading brand of studio, stage and broadcast AV cables and cable assemblies for 30 years. As a complete solutions-based supplier, Gepco also offers value-added service and distribution of connectors, cable management products, patch panels, and wire and cable accessories.
