Poughkeepsie, NY (September 23, 2020)—Like many educational facilities, Marist College in Poughkeepsie, NY worked overtime this summer to prepare to reopen during the pandemic for Fall semester classes. Part of that meant taking Remote Learning students into account—and that in turn led the college to purchase and install 150 Audio-Technica U851RO omnidirectional condenser boundary microphones and 50 ATDM-0604 SmartMixers into 50 classrooms.
“We wanted to offer a learning experience as close to traditional in-person classes, using a blended synchronous model in which the teacher and half the class are live and the other half are remote, while still conforming to all the New York State and Department of Health requirements and staying within our budget,” explains Lee Walis, manager of Technical Services at Marist College, an AVIXA Certified Technology Specialist who would design and install the systems.
“At first, I thought we’d need a high microphone count in each room, at least five in the smaller classrooms and a minimum of 10 in the larger lecture halls, as well as multiple mixers per room to handle a variety of different processing needs. An additional design requirement is to include a voice-lift feature, because the instructors and students would be wearing masks. It was going to be a complicated project and the microphone costs alone were going to be substantial.”
However, Walis began to look into the idea of using boundary microphones, and ultimately chose to use three Audio-Technica U851RO microphones in each classroom. Using one U851 attached to a classroom’s podium and two more attached on either side of a piece of Dibond aluminum / polyethylene composite sheeting hung near the classroom’s ceiling-mounted projector, he was able to cover each room in full in terms of picking up instructors’ and students’ voices.
“You can hear students from the back of the room, with masks on, no problem,” he says, “and the pickup pattern on the boundary microphone means the professor isn’t closely tied to the podium, so everything feels very natural. And the microphone rejects HVAC and projector-fan noise, which would have been a problem with the choir-type microphone arrays we considered in the beginning.”
In addition, Walis is using Audio-Technica’s ATDM-0604 SmartMixers, one in each of the 50 classrooms he’s outfitted for the start of the semester. “The processing is fantastic,” he says. “We’re not doing sound reinforcement for the room mics, so there’s no feedback, even as we’re picking up the softest voices in the room. And even with such a variety of acoustical environments — some classrooms have absorptive carpeting while other have reflective linoleum flooring — we’re getting clear speech intelligibility and predictable response. Plus, the USB output on the mixer is our portal to the computers running either Webex or Zoom for the distance-learning part. In fact, where I thought I was going to have to program the DSP for each room, it turns out that with the ATDM-0604 and U851RO, I can have the exact same program in every room, with only minimal adjustments needed for a few rooms with extreme conditions.
“So, we were able to drastically reduce the number of microphones needed, and use fewer mixers, and I could tune one system once and use that same program in virtually every classroom, thereby reducing labor,” Walis continues. “We were able to accomplish all of this at a fraction of what we though it would cost, which for a small, private college is an achievement, even without the issue of the pandemic.”
Audio-Technica • www.audio-technica.com