Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×

Chris Lord-Alge Jumps Into Digital at MIX LA

Five-time Grammy-winning mix engineer Chris Lord-Alge recently upgraded his MIX LA room for Dolby Atmos work.

Grammy-winning mix engineer Chris Lord-Alge had to rethink his long-established workflow when he added new immersive audio capabilities to Studio A at his MIX LA facility.
Grammy-winning mix engineer Chris Lord-Alge reworked his long-established workflow using Focusrite’s Dante-networked RedNet gear when he added new immersive audio capabilities to Studio A at his MIX LA facility. Photo: Michelle Shiers

Los Angeles, CA (April 22, 2022)—Five-time Grammy-winning mix engineer Chris Lord-Alge recently upgraded his MIX LA room for Dolby Atmos work, using Focusrite’s Dante-networked RedNet products to interconnect his mixing console, DAWs and new speaker system.

Lord-Alge has had to rethink his long-established workflow with the addition of the new immersive audio capabilities in Studio A at his MIX LA facility, where he has mixed and remixed projects by the likes of Green Day, Keith Urban, Madonna, Rod Stewart and so many others over the years. But with encouragement from various industry colleagues, he says, “I decided to make the leap into the unknown and finally eliminate all the vintage gear that was connecting my audio to the console.”

For many years, Lord-Alge’s mixing workflow required projects to be initially transferred to a 48-track Sony DASH tape machine, which he favored for the performance of the converters and the metering (he eventually eliminated all use of tape and just used the machine’s converters). He has now replaced that machine with a Pro Tools HDX rig, operating at 96 kHz/48-bit, that feeds a pair of Focusrite RedNet HD32R 32-channel HD Dante network bridge.

Focusrite RedNet gear is the Dante nexus in Mix LA’s Studio A. Photo: Michelle Shiers

Using Dante Controller, Lord-Alge selects the tracks for distribution over the Dante network through four Focusrite RedNet A16R MkII 16-channel analogue interfaces and into the mixing desk. Lord-Alge’s stereo mix from the console is then routed back through one of the A16R MkII units and an HD32R HD Bridge and captured in the Pro Tools computer.

Mix LA Adds Ocean Way Audio 9.1.4 Monitor System

According to Lord-Alge, the converters in the A16R MkII units offer a noticeable improvement in performance over the DASH machine, plus he no longer has the hassles of his former setup, where he had to synchronize the DASH machine and two Pro Tools rigs. “Once I figured out what level worked and the headroom, I found the sound of the A16R MkII was much better and clearer and more open,” he reports.

A second Pro Tools system is now dedicated solely to mixing in Dolby Atmos, which is natively 48 kHz/24-bit. “I get a great stereo mix of the record with all my colors of analog gear and an analog console and we break that out. Once I’ve done my stereo mix and I’ve created all the stems I need for Atmos, into computer number two they go. So my Atmos mixes are made from stems that are created with all the vintage outboard gear. Then computer number two with the Dolby renderer becomes my second playback system,” Lord-Alge says.

“The second Pro Tools system doesn’t need I/O because it’s all in-the-box,” he continues. “All I need is one RedNet PCIeR Card, which gives me 128 channels over Dante at 48/24, connecting through a Mac Mini as the Dolby renderer. So Pro Tools can send 128 objects to the renderer and the monitoring. None of this would be possible without RedNet.”

Monitor control of the 9.1.4 Ocean Way Audio speaker rig is handled by Avid’s MTRX system.

Close